Maintenance for weightlessness blenders
Weightlessness is a vertical blender container and rotated by a horizontal rotating stirring blades and other components, the molding material mixing container turn left, turn right blade, due to the reverse flow, between the direction of movement of each particle shaped material cross , increased opportunities for contact with each other, counterflow mixer to feed a small squeeze pressure, low heat, high mixing efficiency, mixing more evenly.
First, the machine should be placed in the ventilation position, ensure that the motor power for heat dissipation, extending motor life.
Second, the periodic inspection parts, 1 to 2 times a month, check the project for the active part of the worm, bearings, shaft seals and other wear and turn flexibly, find defects should be repaired in order to work properly.
Third, periodically check the belt slack, the motor should be mobilized out, until the belt taut so far.
Fourth, bearing butter filling on a regular basis to ensure lubrication between the bearings.
Fifth, the electrical control parts, should be kept clean, sensitive, found that failure should be promptly re-repair.
Sixth, used up or shut down, the remaining material should be removed in the weightlessness blenders, clear brush residual powder sub-machine parts. As a long time off, all the machines must be clean, with tarpaulin cover well.
When seven weightlessness blenders paddle assembly and disassembly of light demolition, stable equipment, light to avoid deformation damage.
Eight, mechanical operation when a fault is found, shall be treated off the power before the shutdown.
Nine, weightlessness blenders should be checked before running the slurry bucket blade screw is loose, such as loose should intensify solid.
X. prohibited tools, hard objects, ribbon mixing bucket.
